http://www.esha.be/fileadmin/esha_files/documents/SHAPES/Multipurpose%20schemes%20brochure%20SHAPES.pdfENERGY RECOVERY IN EXISTING
INFRASTRUCTURES WITH SMALL
HYDROPOWER PLANTS
Multipurpose schemes – Overview and examples
Table of contents
1 Introduction
2 Where are the potentials?
2.1 Within a drinking water network
2.2 Within an irrigation network
2.3 Before and after a wastewater treatment plant
2.4 Within a runoff collection system
2.5 On a reserved flow or compensation discharge
2.6 On a fish pass system
2.7 In a navigation lock or dam
2.8 In a desalination plant
2.9 In a cooling or heating system
3 How to start and develop a multipurpose project
3.1 Main calculations
3.2 Recommended steps for developing a SHP project
3.3 Site identification
3.4 Main requirement: integration to the existing infrastructure
3.5 Economic aspects specific to multipurpose schemes
4 Technical recommendations for SHP plants set in existing infrastructures
4.1 Water quality and its impacts on the SHP design
4.2 Penstock and head losses
4.3 Turbines
4.3.1 Main types of turbines
4.3.2 Discharges, flexibility and performances
4.3.3 Drinking water quality and turbines
4.3.4 Adaptations to raw wastewater
4.3.5 Turbine setting
4.3.5.1 Pelton turbines and counter pressure turbines
4.3.5.2 Kaplan turbines and cavitation
4.4 Regulation
4.5 Security system
4.6 Electrical connection
4.7 Maintenance
4.8 Bypass
5 Case studies
6 Conclusions
7 References