Ultra-Efficient Gas Engine Passes Test (64 mpg hwy) - MIT Technology Review

[Bill USA]

http://www.technologyreview.com/energy/24701/

at a steady cruising speed of 50 mph the test car gets 98 mpg.

Monday, March 8, 2010

Transonic Combustion, a startup based in Camarillo, CA, has developed a fuel-injection system it says can improve the efficiency of gasoline engines by more than 50 percent. A test vehicle equipped with the technology gets 64 miles per gallon in highway driving, which is far better than more costly gas-electric hybrids, such as the Prius, which gets 48 miles per gallon on the highway.

The key is heating and pressurizing gasoline before injecting it into the combustion chamber, says Mike Rocke, Transonic's vice president of business development. This puts it into a supercritical state that allows for very fast and clean combustion, which in turn decreases the amount of fuel needed to propel a vehicle. The company also treats the gasoline with a catalyst that "activates" it, partially oxidizing it to enhance combustion.

The technology is one of many being developed to squeeze more efficiency out of existing engines to meet new fuel economy standards and other regulations--without making vehicles more expensive. "It's a time of renaissance for internal combustion engines," says William Green, a professor of chemical engineering at MIT. Improvements include smaller engines boosted with turbocharging, improved valve timing, and direct injection, in which fuel is injected directly into the combustion chamber rather than into an adjacent port. He says Transonic's approach "may be a promising way to improve on conventional direct injection. Several companies and university research groups are currently pursuing a variety of non-conventional direct-injection engine concepts, and some have published engine data which look very promising."

If it works as promised, the new technology would improve fuel economy by far more than these other options, some of which can improve efficiency on the order of 20 percent. It is expected to cost about as much as high-end fuel injection systems currently on the market, Rocke says.
(more)

[demosincebirth]

1. It'll never hit the market.

[Bill USA]

5. here's some more on this system from Automotive Engineering International online

http://www.sae.org/mags/aei/7160

Throughout the history of the internal-combustion engine, engineers have boosted cylinder compression to extract more mechanical energy from a given fuel-air charge. The extra pressure enhances the mixing and vaporization of the injected droplets before burning. Recent work by Mike Cheiky, a physicist and serial inventor/entrepreneur, is focusing on raising not only the fuel mixture’s pressure but also its temperature.

Cheiky's aim, in fact, is to generate a little-known, intermediate state of matter—a so-called supercritical (SC) fluid—which he and his co-workers at Camarillo, CA-based Transonic Combustion believe could markedly increase the fuel efficiency of next-generation power plants while reducing their exhaust emissions.

Transonic’s proprietary TSCi fuel-injection systems do not produce fuel droplets as conventional fuel delivery units do, according to Mike Rocke, Vice President of Marketing and Business Development. The supercritical condition of the fuel injected into a cylinder by a TSCi system means that the fuel mixes rapidly with the intake air which enables better control of the location and timing of the combustion process.

The novel SC injection systems, which Rocke calls “almost drop-in” units, include “a GDI-type,” common-rail system that incorporates a metal-oxide catalyst that breaks fuel molecules down into simpler hydrocarbon chains, and a precision, high-speed (piezoelectric) injector whose resistance-heated pin places the fuel in a supercritical state as it enters the cylinder.

(more)

[WHEN CRABS ROAR]

2. I ask why wasn't it developed by mainstream auto makers?

[doc03]

3. The oil industry will keep that off the market n/t

[RC]

4. Just like the 100 MPG carburetor.

You know, the one with 0-60 in 4.5 seconds. Same idea.