I live in a 1300-square-foot house in a working-class neighborhood, and half the houses here are brick, including ours. Most of the more upscale neighborhoods in this area seem to be mostly brick.
The Judge is a neat firearm, but the capacity is rather limited for my taste. I'd rather have a 9mm with lightweight JHP's, or a .223 carbine.
FWIW, here's an article on .223 penetration vs. handgun penetration in building materials:
http://www.olyarms.com/index.php?option=com_content&task=view&id=15&Itemid=26The Call-Out Bag
by Gunsite Training Center Staff
A Comparison of .223 Penetration vs. Handgun CalibersThe .223 shoulder-fired weapon systems (e.g., AUG, CAR) have received some recent interest as indoor tactical weapons for special operations teams. increased power, longer effective distances, and greater tactical flexibility have been cited as positive factors of the .223 systems over 9me SMG-type weapon systems. Other authors (Fackler, et all) have postulated greater capability for tissue damage and incapacitation of the .223 rifle cartridge over the 9mm projectile fired from handguns or SMGs. Negative considerations for the indoor use of the .223 weapon systems focus on over-penetration of projectiles and possible subsequent liability.
Our effort was made to compare the penetration characteristics of various .223 bullets to various handgun bullets fired into test barriers representing indoor and outdoor building walls. We felt that the following test might mimic shots fired from inside a building, through the internal rooms, out the exterior wall, and into another similar building nearby. A comparison of wall penetration effects by a variety of handgun calibers versus the effects of .223 FMJ ball, .223 SP, and .223 HP, under these same conditions, was expected to substantiate other findings reported or provide new information to those interested in this area of ballistics.
Two interior test walls were constructed using a wood 2x4 frame with standard drywall board attached to both sides. Two exterior test walls were made using wooden frames with drywall board attached to one side and exterior grade T1-11 wooden siding attached on the other (exterior) side. R-19 fiberglass insulation batting (Dow Coming) was stapled inside the two exterior test wails. To maintain test medium consistency, no wooden cross beams, electrical fixtures, conduits, or electrical wiring were placed in any of the test walls.
(snip)
The following results were obtained:
1. All handgun calibers exited exterior wall #1. This means they exited the "house" after passing through two interior "rooms," then entered another "house" to impact into the berm. The handgun caliber which demonstrated the least penetration was .22 LR Lightning.
2.
The only calibers which did NOT exit the "house" were .223 (5.56) soft point and hollow point loaded bullets. 3. All projectiles demonstrated directional changes in their trajectory after passing through the first interior wall. The greatest directional changes (10 inches+ yaw) were shown by 9mm and .40 S&W projectiles.
4. Directional changes in bullet trajectory appeared to increase in magnitude with each test wall the projectile passed through.
(snip)
Many thanks to Jack Furr, Ron Benson, Pete Wright, and Seth Nadel, U.S. Customs, for conducting and reporting this test.
.22 LR 40 gr Lightning 899 fps Captured in exterior wall #2
9mm 147gr Win JHP 948 fps Captured in exterior wall #2
9mm 147 gr Win JHP 1004 fps Exited exterior wall #2
.40 S&W 180 gr FMJ 941 fps Exited exterior wall #2
.40 S&W 180 gr Black Talon JHP 981 fps Exited exterior wall #2
.45 ACP 230 gr Win FMJ ball 867 fps Captured in exterior wall #2
.45 ACP 230 gr HydraShok JHP 851 fps Exited exterior wall #2
.223 (5.56) 55 gr Fed FMJ ball 2956 fps Exited exterior wall #2
.223 (5.56) 55 gr Rem SP 3019 fps Captured in exterior wall #2
.223 (5.56) 55 gr Fed JHP 3012 fps Captured in exterior wall #2