|
Edited on Wed Aug-09-06 07:29 AM by ProfessorGAC
I've some pretty elaborate amplification systems when i was playing a lot as a keyboardist.
The biggest one i had was a pair of TOA 380Z's (18" three ways) with a QSC 300w x 2 for low end and a mono QSC 180w for the mids and highs. But, that's probably overkill for most folks. Plus, we were running the keys in stereo through a 9,000 watt PA system.
Before that, i used the same mixer and same QSC to power a pair of Bose 801's.
I've also used a slant front monitor and a simple mono amp (at least 150 watts) for convenience.
I can tell you that most streamlined thing he can do is to plug into the PA, and then bleed some keys into the monitor, or use the Roland strictly as a stage monitor (tip it back and face it at him) so the keys project to the audience through the sound system.
And, i've even used a small bass amp when sitting in with someone when i didn't quite care enough to haul a bunch of gear. But, even then i DI'd to the PA.
But, if he's looking for something new, Peavey, Roland, and Yamaha all make keyboard amps. They have typically 4 channels, each with their own passive EQ and usually have a reverb at the tail end. The are usually slighted slanted back, and are about the size of a combo bass amp. Those i've seen the most have a 15" with a horn or a piezo.
If i were still playing keys regularly, and we were scaled back, i'd probably get the Yamaha. We've had their power amps in the past and found them to be very rugged and roadworthy. The Professor
|